I’ve been water marbling again. This time I didn’t create a certain pattern but instead I just did whatever came in my mind. Here’s the result:Polishes used, all by OPI: Big Apple Red A Roll In The Hague The IT Color Forrest My Case Can’t Find My Chechbook Lost My Bikini In Molokini Kiss Me I’m Brazilian
For my top coat I went with Electric Laneby Nails Inc.Thanks for stopping by! :*
Have you spotted Cirque‘s Vice Collection yet? Super bright, neon and holo are the keywords of this fantastic collection. There are five bright creme shades to choose from plus a holographic top coat. If I may say so myself I think I’ve been a good girl by picking just three out of the six (*patting myself on the shoulder*). I went with my fave colors, purple, pink and blue. But to be fair, if there also was a red one, I’d pick that one up too 🙂
Enough with the rambling… on to the polish! I created this water marble design with Nympho (pink), Lean (purple) and Miami-Dade(blue). I applied a white polish as my base to brighten up the colors. I re did the nail of my ring finger three times and eventually gave up and added some dots on the spots that didn’t turned out the way I wanted. Yes, water marbling can be a huge pain in the behind, not gonna lie. I do like how these turned out. I see myself using these polishes on a regular base. The formula of all three was great, at least for what I’ve experienced so far. The pink and purple dry a bit dull so make sure to apply a top coat for a glossy finish.
You can never go wrong with black and white, can you? For this mani I used a combo a grey, white and black polishes:For my index I applied two easy coats of New Moon by Cirque. My pinky shows three thin coats of Hatch, also by Cirque. The gradient on the nail of my ring finger is made with both New Moon and Hatch. And lastly I created a water marble design by using the same colors and added Cosmos (423/508) by El Corazon. For a smooth and shiny finish I applied one coat of top coat. I’m happy with the outcome of this sort of mix match 🙂 What do you think?:*
For this years Kingsday I decided to create another water marble nail art. This reminds me how many things I still need to share here with you guys. I’m so behind with posting!
This is not perfect but I’m pretty happy with the outcome:For this design I used the following polishes: Essence: wild white ways – 33 (white) Essence: topscorers (red) Essence: electriiiiiic – 31 (blue) OPI: A Roll In The Hague (orange)What do you think of this design?
Watermarble nail art… A hot mess? Fail? 9 times out of ten yes. But here’s a super easy technique with NO mess, NO bubbles and NO screw ups. For real! I used three coats of Barney by Llarowe as my base color. For the marble design I also used Vivian + Edward and What’s Your Dream?, both by Llarowe. How to? Go ahead and create your design in a cup of room temperature water as you’d do with a ‘regular’ watermarble. Let it dry for a few minutes. If the design got stuck to the side walls of the cup, now is the time to gently make sure it get’s ‘loose’ from the side walls. Now let it dry for another 15 minutes or so. When dry, gently pick up the design with tweezers and blow dry of pat dry with for example a piece of kitchen paper. When the design is dry you can cut it into pieces as desired. You can even cut it in the shape of your entire nail(s) to get a full coverage ‘decal’. Apply top coat and place the pieces on the nail. Finish with top coat and you’re done! Have you already used this technique? If not, just give it a try 😉
I have a fun mani to share with you. I finally gave watermarbling another try and I think these turned out quite pretty:I used two coats of OPI‘s My Gecko Does Tricks as my base color. For the marbled design I also used This Color’s Making Waves. Both polishes are part of the Hawaii Collection for Spring Summer by OPI. If you ignore the few bubbles, these turned out okay… right? I accidentally picked up too much blue and too little green with the design on my ring finger so I fixed that by adding some blue dots 😀 This accident turned out to be a pretty accent nail huh!
Finally… my first water marble video. Yay! Yes, I cheated a bit because I only did an accent nail but I’m very pleased with the final result. First of all… the magenta polish (Mermaid’s Secret by Essence) is fantastic! It is gorgeous! Both polishes used for this design are part of their new Aquatix Collection. Stay tuned for the other shades of this collection. They are beautiful!
A step by step guide and a list of which products I’ve used is listed below. Plus there are a few tips and tricks 🙂
Apply a base coat to protect your nails and wait for it to dry.
Apply your base color and let it dry.
Wrap your fingertips (not the nails obviously :p) with two pieces of tape to protect your skin from getting all messy. This makes the clean up process way easier.
Get your cup with water (room temperature) and add a drop of the base color followed by the second color, the first color, the second color and so on until you have a nice bulls eye.
Use a needle to drag the design from the middle to the bottom and make sure it sticks to the cup. Now start again at the middle, dragging towards the top.
Create the design by dragging from the left to the right and leave some space in between them.
Pick the part of the design which you want to transfer onto the nail and dip your nail in the water (directly above the design).
Keep your finger under water while cleaning up the polish residue with a q-tip.
Once you’ve cleaned up the area slowly pull your finger out of the water.
Remove the tape and clean up your cuticles with for example a small (angled) brush and some nail polish remover or acetone. Note: I forgot to turn the camera on while cleaning up, sorry!
Once your design is dry, add a coat of your favorite top coat and you’re done!
Tips ‘nd Tricks:
Make sure the water you’re using is room temperature. When it is too warm or too cold it might be that the polish doesn’t spread easily or dries too fast.
Add the drops of polish by holding the brush just above the water. Otherwise the drops might sink to the bottom of the cup. When the drop refuses to let go of the brush you can gently touch the water with the brush to help it come off.
Clean up the needle in between dragging by using a lint free wipe or a piece of kitchen paper. I prefer a lint free wipe over a cotton pad because cotton pads might make your needle all hairy :p
Make sure that two (or four) outer sides of the bulls eye stick to the cup. This makes sure that your design doesn’t move around while you’re dragging with the needle.
Start the design from the second or third outer ring of the bulls eye, not the first (outer) one.
When you’re ready to dip you’re finger(s) in the cup, make sure to do it right above the design holding your nail straight above it, not angled. When you dip your finger in the cup with an angle, the design might not transfer as desired. For example, when you’re doing multiple nails at once, make sure that all your nails hit the water at exactly the same time. I hope this makes sense.
You can use a q-tip soaked in nail polish remover or acetone to clean up underneath your nails, in case that part got marbled. Just ‘roll’ the q-tip underneath your nails.
Lastly, a good preparation is a must. You don’t want to need to search for a needle while you’re bulls eye is already done 😉